25 - 420 bar, 1300 - 6600 l/min.
BAUER I-series water-cooled high-pressure compressors are ideal for installation under the most difficult ambient conditions as well as for use in industrial applications.
By using targeted water cooling between the interstage and afterstage coolers and valve heads, the system enables the majority of the heat produced to be absorbed by the cooling water.
As a result, the multi-stage, industrial high-pressure compressors require very little maintenance and achieve long service lives. At the same time, they are quieter than comparable air-cooled compressors.
Below is a selection of equipment options for the I-serie, water cooled compressor
The plate heat exchanger set can be used to build a dedicated enclosed compressor cooling water circuit. In open cooling systems with stream water or sea water or open cooling towers, this is essential in order to operate the compressor with cooling water of suitable quality.
The set consists of an air-to-water heat exchanger which makes it possible to operate water-cooled compressor units independently of a water supply.
Compressor units by BAUER KOMPRESSOREN can be supplied with explosion protection and conforming to ATEX directives.
Intake pressure reduction ensures that the compressor takes in the gas at the appropriate pressure. Integrated safety valves and pressure monitoring provide an effective means of ensuring that the permissible intake pressure is not exceeded or undershot.