GIB-SP RANGE BK 26

110 - 520 bar, 10400 - 15000 l/min.

The combination of the screw compressor and high-pressure booster enables a high level of free air delivery with compact dimensions. The compression process involves 5 stages, keeping compression temperatures to a minimum.

By using targeted water cooling between the interstage and afterstage coolers and valve heads, the system enables the majority of the heat produced to be absorbed by the cooling water.

As a result, these industrial high-pressure compressors require very little maintenance and achieve long service lives. At the same time, they are quieter than comparable air-cooled compressors and designed specifically for continuous use in industrial applications (heavy-duty use).

Product information

B-CONTROL II compressor control

The advanced version of the proven B-CONTROL MICRO compressor control.

The B-CONTROL II features a 5.7″ colour touch screen display with 10 direct selection keys. Interaction between user and control is user-friendly and logical. The information on the display can be read off in plain text. Various languages are available for selection.

As well as supporting the control and monitoring of important unit functions, the B-CONTROL II also features user-friendly additional features such as a data logger, USB port and accessible interfaces such as Modbus, CAN Bus or Profibus. It can even be used for integrated control of an interconnected system with up to four compressors.

Additional sensors and devices can be connected, e.g. for monitoring intermediate pressures and temperatures. Remote data transfer via B-MESSENGER is supported as an option.

The B-CONTROL II can be customised and expanded to meet your individual requirements – even if these involve controlling end-to-end system sequences..

Compressor block

For compressor units with intake pressure, the BK 23 to BK 52 block series feature a pressure-tight crankcase for uniform absorption of the internal gas forces

Water cooling

By using targeted water cooling between the interstage and afterstage coolers and valve heads, the system enables the majority of the heat produced to be absorbed by the cooling water. This maintenance-friendly cooling concept is suitable in particular for difficult spatial and ambient conditions where it would not be possible to use an air-cooled compressor.

Screw booster concept

The BAUER GIB-SP-series forms a compact, structural unit and comprises a combination of a screw compressor and a 4-stage high-pressure booster. The continuous shaft allows the motor to operate the V-belt driven screw compressor and the direct-coupled booster at the same time.

Specifications