Whether they’re found in standard compressed-gas applications in industry or built into vehicles for mobile use: The air-cooled high-pressure compressor units in the K 22 – K 28 series are reliable, durable and the solution of choice for demanding customers.
A modern and reliable system which has been proving its worth in application for many years: with V-belt drive and in horizontal format.
The B-CONTROL MICRO is a modern, easy-to-use compressor control with colour display for the intelligent control and reliable monitoring of all basic functions.
Interaction between user and control is user-friendly and logical. The information on the display can be read off in plain text. Various languages are available for selection.
Additional benefit: interfacing with external input/output signal encoders is possible at any time, as is interconnected operation or the connection of an external display unit.
Interaktion mellem brugeren og B-CONTROL er brugervenlig og logisk. Oplysningerne på displayet kan aflæses klart i teksten, og der er mulighed for at vælge imellem forskellige sprog.
The compressor unit, which is assembled on a stable base frame and equipped with vibration dampers, is ideal for installation without a foundation. Its design leaves room for various integrated motor concepts such as powerful electric or diesel generator sets. A low-maintenance V-belt drive provides the ideal basis for speed optimisation independent of mains frequency and motor type. This well thought-out unit configuration safeguards access for maintenance purposes at any time.
Air-cooled, equipped with intercooler and aftercooler, oil and water separator after every compressor stage, automatic condensate drain and forced feed oil lubrication. These blocks provide the ideal basis for fully automated compressor systems, particularly for the compression of air and gases in atmospheric input conditions. A clever air cooling system with generously dimensioned coolers combined with cylinders with extensive ribbing can be relied upon for best possible cooling of each individual compressor stage. The bearings are dimensioned for a service life far in excess of 30,000 operating hours. Powerful pressure lubrication and oil microfilter for minimum wear of moving parts. Long maintenance intervals for valves and piston rings as well as where oil changes are concerned keep the running costs of the unit low. Trimmed for smooth running – all drive units are dynamically balanced for quiet and vibration-free running.
Below is a selection of details and features for the K22 – K28 compressor.
Super-Silent cladding reduces the noise level of the compressor unit and enables an exhaust shaft to be used.
.jpg)
This add-on module for the B-CONTROL II control monitors the pressures and temperatures of all compressor stages. If the specified limit values are undershot or exceeded, the unit shuts down automatically. Information is displayed via the B-CONTROL II control display.
.jpg)
BAUER treatment systems for highly compressed air and gases reduce content such as moisture, oil and particles to a permissible level. We are able to supply you with a variety of treatment systems tailored precisely to meet the needs of your application and meeting the requirements of ISO 8573-1 and DIN EN 12021¹ or the European Pharmacopoeia, among others. Filter systems with disposable cartridges or regenerative filter systems are also available. ¹ If the units are maintained and installed correctly as described in the operating instructions and subject to the BAUER AERO-GUARD being used if CO2 concentration in the intake air exceeds prescribed standard values.
.jpg)
he B-CONTROL II features a 5.7″ colour touch screen display with 10 direct selection keys. Interaction between user and control is user-friendly and logical. The information on the display can be read off in plain text. Various languages are available for selection. As well as supporting the control and monitoring of important unit functions, the B-CONTROL II also features user-friendly additional features such as a data logger, USB port and accessible interfaces such as Modbus, CAN Bus or Profibus. It can even be used for integrated control of an interconnected system with up to four compressors.
Bay Kompressor ApS
Fuglebækvej 4A
DK-2770 Kastrup, Denmark
VAT: 28308213
Meet us at Facebook.
Copyright © 2020 Bay Kompressorer. Alle rettigheder forbeholdes – Design by DAN®