As cost-effective and durable system solutions for heavy-duty applications, the water-cooled medium-pressure boosters in the GIB series by BAUER KOMPRESSOREN support a wide and varied range of options for post-compression.
The multi-stage boosters can be used in a variety of different ways: as a booster compressor of air from a compressed air supply system, as a nitrogen compressor of inert gases from generators or storage bundles, or as a gas compressor for the compression of methane from pipelines or biogas directly from the treatment system.
In line with your individual needs and industrial requirements, BAUER KOMPRESSOREN can also provide you with tailor-made turnkey system solutions.
The advanced version of the proven B-CONTROL MICRO compressor control. The B-CONTROL II features a 5.7″ colour touch screen display with 10 direct selection keys. Interaction between user and control is user-friendly and logical. The information on the display can be read off in plain text. Various languages are available for selection.
As well as supporting the control and monitoring of important unit functions, the B-CONTROL II also features user-friendly additional features such as a data logger, USB port and accessible interfaces such as Modbus, CAN Bus or Profibus. It can even be used for integrated control of an interconnected system with up to four compressors.
Additional sensors and devices can be connected, e.g. for monitoring intermediate pressures and temperatures. Remote data transfer via B-MESSENGER is supported as an option. The B-CONTROL II can be customised and expanded to meet your individual requirements – even if these involve controlling end-to-end system sequences.
For compressor units with intake pressure, the BK 23 to BK 52 block series feature a pressure-tight crankcase for uniform absorption of the internal gas forces
The water-cooled series is characterised by its crankcase, which is pressure-resistant up to 16 bar. This makes compression to the required final pressure possible without blowby losses. At the same time, impurities in the process gas are minimised.
By using targeted water cooling between the interstage and afterstage coolers and valve heads, the system enables the majority of the heat produced to be absorbed by the cooling water. This maintenance-friendly cooling concept is suitable in particular for difficult spatial and ambient conditions where it would not be possible to use an air-cooled compressor.
Liter per minute: 2060 - 15400
Bar: 25 - 110
Motor: 15 - 118 kw
Net weight: 1160 - 3360 kg
Below is a selection of equipment options for the water-cooled medium-pressure booster
The plate heat exchanger set can be used to build a dedicated enclosed compressor cooling water circuit. In open cooling systems with stream water or sea water or open cooling towers, this is essential in order to operate the compressor with cooling water of suitable quality.
The set consists of an air-to-water heat exchanger which makes it possible to operate water-cooled compressor units independently of a water supply.
Compressor units by BAUER KOMPRESSOREN can be supplied with explosion protection and conforming to ATEX directives.
Intake pressure reduction ensures that the compressor takes in the gas at the appropriate pressure. Integrated safety valves and pressure monitoring provide an effective means of ensuring that the permissible intake pressure is not exceeded or undershot
Bay Kompressor ApS
Fuglebækvej 4A
DK-2770 Kastrup, Denmark
VAT: 28308213
Meet us at Facebook.
Copyright © 2020 Bay Kompressorer. Alle rettigheder forbeholdes – Design by DAN®