B-NITROX is BAUER’s nitrox membrane system. This compressor system enriches breathing air with an increased oxygen content of up 40%.
With B-NITROX, BAUER is the only manufacturer in the world to offer a complete nitrox system certified by the TÜV. True to BAUER’s uncompromising safety philosophy, all components have been perfectly matched.
The B-NITROX unit has been designed for reliable nitrox supply to stationary, professional diving centres, safari boats, live-aboards, yachts and cruise liners as well as for commercial diving missions. The legislator has issued clear regulations, as the compression of gases requires a specific degree of tested safety. This is an important consideration with regard to product liability in the event of accidents (in particular for tour operators and hotels who run diving centres on their sites).
When used in conjunction with original BAUER filter cartridges, the P 61 purification system with additional oil and water separator and pressure retention check valve can be relied upon for breathing air treatment conforming to DIN EN 12021:2014¹. A type-tested and sealed final pressure safety valve enables particularly high levels of operational safety to be achieved. 2400 m³ of air can be treated.
The advanced version of the proven B-CONTROL MICRO compressor control.The B-CONTROL II features a 5.7″ colour touch screen display with 10 direct selection keys. Interaction between user and control is user-friendly and logical. The information on the display can be read off in clear text. Various languages are available for selection.As well as supporting the control and monitoring of important system functions, the B-CONTROL II also features additional user-friendly features such as a data logger, USB port and accessible interfaces such as Modbus, CAN Bus or Profibus. It can even be used for integrated control of an interconnected system with up to four compressors.Additional sensors and devices can be connected, e.g. for monitoring intermediate pressures and temperatures. Remote data transfer via B-MESSENGER is supported as an option.The B-CONTROL II can be customised and expanded to meet your individual requirements – including control of end-to-end system sequences.
The oxygen membrane separates N2 out of the breathing air, thereby increasing the oxygen content. The oxygen content in the breathing air can be freely regulated between 21% and 40% (lower and upper limit values).
Below is a selection of equipment options for the B-Nitrox compressor.
NWhen used in conjunction with original BAUER filter cartridges, the P 81 filter system with additional oil and water separator and pressure retention check valve can be relied upon for breathing air treatment conforming to DIN EN 12021:2014¹. A type-tested and sealed final pressure safety valve enables particularly high levels of operational safety to be achieved. 5,200 m³ of air can be treated.
The B-SECURUS system monitors the saturation of the filter cartridge(s) by measuring the moisture in the molecular sieve and outputs a warning on the display or the compressor control in advance of when the filter cartridge should be changed.B-SECURUS automatically switches the compressor unit off when the cartridge reaches saturation point. The B-SECURUS filter monitoring unit can only be used in conjunction with P 41/P 42/P 61/P 81 filter systems and external BAUER filter systems.
Using the AERO-GUARD reduces the CO2 content of the breathing air to approximately one-third of the intake value. The constantly increasing levels of CO2 concentration in the air resulting from unfavourable environmental influences are making it more and more difficult for the operators of filling stations to be sure of achieving compliance with legally binding maximum limits for CO2. With AERO-GUARD the operator is always on the safe side.
In the case of operation in locations where air humidity is high (tropical regions, for example), we recommend installing a separator downstream of the first compressor stage. This can extend the service life of the unit and reduce maintenance costs.
Bay Kompressor ApS
Fuglebækvej 4A
DK-2770 Kastrup, Denmark
VAT: 28308213
Meet us at Facebook.
Copyright © 2020 Bay Kompressorer. Alle rettigheder forbeholdes – Design by DAN®